One of the best DACs for Apple Music Lossless in 2026

Fiio’s affordable KA11 dongle comprises a DAC with a most decision of 32bit/384kHz — which is nicely above Apple Music’s top-tier “Hello-Res” lossless format (24bit/192kHz) — so you possibly can ensure that you’re getting each final little bit of high quality out of no matter you’re listening to. Better of all, the KA11 is highly effective, too, with a better quantity output than Apple’s on headphone adapter (extra on this under). At round $30, this dongle is the most effective bang to your buck in the case of upgrading the audio expertise in your iPhone, Android, PC or Mac. There’s even a Lightning model obtainable for these with older iPhones and iPads.

We notably just like the simplicity of Fiio’s KA11 because it’s plug-and-play without having to cost it. It’s solely barely greater than a typical headphone adapter and it comes with a rugged, woven cable, so it could deal with quite a lot of put on and tear. There’s even a small LED on the entrance that allows you to know for those who’re listening to straightforward, excessive, or higher-resolution recordsdata so that you could be assured you’re getting essentially the most out of your music in actual time.

Sure, it’s the Apple headphone adapter you already know and (perhaps) love, but it surely’s price contemplating if you need one thing tremendous light-weight and much more reasonably priced. Apple’s dongle doesn’t assist the bigger, Hello-Res recordsdata obtainable on its music service, however it could deal with the usual lossless (24bit/48kHz) format no drawback. As you’d count on, it’s obtainable in Lightning and USB-C variations relying on which Apple gadget you’re connecting it to.

Certain, essentially the most demanding listeners may lament the dearth of assist for the upper resolutions, and it may be slightly quiet with some headphones which are high impedance (usually costlier “audiophile” fashions). For the overwhelming majority of customers, although, Apple’s dongle will do the job. In the event you’re undecided, test the guide to your headphones and search for Impedance (typically listed as Ohms) — something under round 150Ohms and you have to be wonderful. Something above that, and also you may need to think about Fiio’s dongle as a substitute.

Whereas this information is primarily centered on Apple Music, a lot of the gear right here will unlock lossless audio regardless of the place you pay attention. If Tidal is your platform of alternative, you could be aware of the MQA codec, which the corporate used for its high-resolution audio till finally switching to FLAC in 2024. MQA may not be as widespread in streaming anymore, however for those who nonetheless need to be sure you can hearken to music from shops or companies that present it, the iFi GO Link may have you coated, together with the usual Apple Music excessive decision audio codecs, and anything, as much as 32-bit/384kHz.

Sennheiser’s BTD700 is a wi-fi adapter that plugs into your cellphone, upgrading its Bluetooth capabilities with the newest high-resolution codecs similar to Aptx Adaptive and Aptx Lossless. iPhones don’t assist any of those natively, however with this small dongle, you possibly can unlock the total potential of Bluetooth audio and the upper bitrates (and in concept audio high quality) Aptx Lossless gives. There’s a small caveat, although: you have to Bluetooth headphones that additionally assist one in every of these codecs such as these or these (or test the product web page of the set you personal or are contemplating).

The BTD700 is straightforward to make use of, simply plug it in to your cellphone’s (or different gadget’s) USB-C port, pair your headphones to it and off you go. An LED on the dongle lets you already know which of the six totally different Bluetooth “qualities” (codecs) you’re having fun with so you’ll know if you’re listening to lossless audio. The helpful half? When you’ve paired your headphones with the dongle, you gained’t must re-pair for those who join the BTD700 to a PC or Mac. This little adapter successfully offers something with a USB-C port an audio improve, and there’s even a low-latency mode for gaming. Word, there’s no Lightning possibility right here, so for those who’re on an older cellphone you may need to reside with utilizing an adapter.

In the event you’re trying to take issues to the subsequent stage with out spending “high-end” cash, there’s so much to like concerning the Melody DAC from Snowsky. Not like a easy dongle, the Melody has onboard controls and two headphone jacks. A type of is for normal 3.5mm headphones, however the different is for 4.4mm “balanced” headphones, which implies the Melody can develop with you in case your audio journey takes you deeper into the world of audiophilia.

The wooden end offers it an aesthetic really feel and though it’s mild, it nonetheless delivers that high quality “Hello-Fi” really feel. As for sound high quality, there’s assist for 384K/32bit pattern charges, which covers all the things Apple Music can ship. The built-in amplifier can simply go louder than you must most likely ever pay attention and there are different luxuries, too, similar to assist for inline microphones — so you possibly can nonetheless deal with calls and take conferences in your cellphone. We additionally love that you could tailor the sound to your choice through the Fiio Management companion app.

When you can squeeze a formidable quantity of audio tech right into a headphone adapter, a barely greater gadget affords a good step up in each specs and options. Moondrop’s Moonriver T2i DAC is barely bigger than a pack of gum, and it has a classy design that doesn’t seem like a boring, generic dongle.

Importantly, the Moonriver T2i builds on the success of the corporate’s Moonriver 2 DAC. The “2” partly refers to the usage of twin DAC chips right here, which delivers a “balanced” sign. Every channel can deal with as much as 32bit/384KHz decision and there are two headphone ports. One for normal 3.5mm headphones and one other for 4.4mm connections — making use of that balanced output. If that is your first step into the world of Hello-Fi DACs, you’re completely wonderful with 3.5mm headphones, however some favor the 4.4mm connector because it supplies extra energy and potential sign advantages, particularly for those who’re utilizing a headphone amp.

With the Moonriver T2i you’ve got a pair extra sensible benefits. For one, there are bodily quantity controls on the gadget itself. In the event you ever felt that the 16 ranges of loudness on the iPhone (I simply counted) weren’t sufficient, then the 100 steps of adjustment on the Moonriver T2i (through companion software program) get rid of any worries about setting the music to the proper stage. In case your headphones have an in-line microphone, the excellent news is that this dongle will move that by to your cellphone or PC so that you gained’t want a separate gadget for calls.

Most significantly, the sound that comes out of the Moonriver T2i is vivid and daring. You’ll hear audiophiles discuss sound stage, element and width, all you want to know is that this DAC ticks off all of the buzzwords and serves up vivid, sturdy sound that’s going to make any lossless/hi-res music actually shine.

Who mentioned a DAC must be a dongle? In the event you’re in search of one thing slightly extra all-in-one then the SP3 BT active speakers from Fiio are an amazing possibility. We like that, for a similar value as many standalone DACs, you’ve got all the things you want to decode high-resolution music from virtually any supply with USB-C and Aux inputs for telephones together with customary Hello-Fi connections similar to optical, RCA and coaxial.

These audio system didn’t make it to our testing bench, however the SP3 BTs commonly obtain reward for his or her sound and premium construct high quality at an inexpensive value. For Bluetooth listening, there’s assist for each Aptx Adaptive and HD together with Sony’s rival LDAC making these audio system one thing of an audio swiss-army knife. Whereas these audio system will make an ideal companion to your own home workplace or workspace, they’ll simply discover a dwelling in your lounge or den connecting to every other music gamers you may need (for vinyl you’ll nonetheless want a pre-amp).

In the event you’ve had some expertise with DACs and want to ratchet issues up a notch or three, then the Mojo 2 from British firm Chord desires to have a phrase. At $650, that is undoubtedly within the high-end value vary, however the expertise and options it gives make it price contemplating for critical audiophiles. However the brains behind the Mojo 2 have been making digital to analog converters just about since there was digital music to even convert. That have is what makes the Mojo 2 a favourite amongst music followers.

Most choices on this information are designed for cell units first, the Mojo 2 is extra of a hybrid gadget. The cell dongles above all take their energy from the participant you join them to, which is handy, however clearly is much less variety to your cellphone’s battery life. The Mojo 2 has an inner cell so gained’t tax the one in your cellphone or laptop computer. It’s sufficiently small to be transportable, however substantial sufficient to reside in your desk.

Not like most DACs that use off the shelf chips to deal with the digital-to-audio conversion, the Mojo 2 makes use of subject programmable gate array (FPGA) expertise to create its personal customized “chip.” It’s additionally highly effective sufficient to behave as each a DAC and a preamp, driving even power-hungry headphones with ease. We’ve seen FPGA achieve reputation in gaming circles for its capability to mimic numerous consoles, however that very same flexibility is what makes it attention-grabbing to the audio engineers at Chord.

In the event you want one thing that’s capital L loud, then the Mojo 2 won’t disappoint. Proceed with warning right here. It’s truly highly effective sufficient to drive two pairs of headphones on the identical time and has two 3.5mm ports so you are able to do precisely that. The curious round buttons can be used to vary sound profiles with an excruciating stage of element.

The Mojo 2 has customary USB-C, microUSB, optical and coax inputs so it’s extra versatile than quite a lot of its competitors on this regard. Though it’s price noting that you could solely cost the Mojo 2 through microUSB. After all, there’s a cable offered for this, however for those who’ve absolutely made the swap to USB-C, it’ll imply it’s a must to guard the charging cable intently.