This $65 ROG Xbox Ally X case is expensive, but it surely’s the most effective you should purchase

I’ve lined a number of of dbrand’s Killswitch circumstances at this level, together with one designed for the unique ROG Ally X and one other created for the Switch 2. They’re at all times arguably a bit overpriced, however in some sense, you get what you pay for. They provide all-around safety that features the entrance, again, and sides of the console, alongside a journey cowl and skins that cowl its entrance.

In relation to the ROG Xbox Ally X, I used to be a bit involved. The hand-held options an Xbox controller-inspired design, full with sizable arms, and I wasn’t certain if dbrand might pull it off once more given the transportable’s distinctive form. Fortunately, the attitude-filled accent maker has managed to make it occur once more. It is perhaps costly, however should you’re searching for a approach to shield your expensive ROG Xbox Ally X, dbrand’s Killswitch cannot be beat.

Placing the Killswitch on the ROG Xbox Ally X is usually a bit finicky

These dreaded pull tabs are again

Like each dbrand Killswitch case I’ve used, there are a number of completely different packages out there for the ROG Xbox Ally X that each one fluctuate in value. There’s the $60 (recurrently $75) Important equipment, which solely options the Killswitch Case, a kickstand (which is constructed into the case) and a entrance pores and skin. Then there’s the $80 (usually $100) Journey choice that features all the things from Important, alongside a journey cowl and stick grips. Lastly, there’s the Extremely tier, which is on sale for $65 proper now (down from $125), which incorporates all the things from different packages, alongside two high-quality glass display protectors.

Usually, I like to recommend the journey bundle since you’ll be able to at all times get an honest low-cost display protector on Amazon, however given the low cost, the Extremely tier is the most suitable choice proper now. The appliance course of is fairly easy, however extra so than every other dbrand case I’ve used, placing the precise case on the hand-held is a little bit of a chore.

First off, including the skins is a straightforward course of that requires you to line them up with the ROG Xbox Ally X’s varied buttons. The perimeters ruffled a bit regardless of me operating my finger down it, however this a part of the pores and skin is roofed by the case anyway, so it is not likely a difficulty (my greatest guess is the little notches on the high of every arm trigger this). It is price noting that there is an odd rim across the joystick that the pores and skin would not cowl. I do not know why dbrand left this house unprotected, but it surely seems to be a bit odd. That mentioned, it is actually not that large of a deal.

It is the method of really placing the enclosure on the ROG Xbox Ally X that is troublesome. That you must push the hand-held’s arms deep into the case, then use the pull tabs to elevate the highest over the shoulder buttons and triggers. Whereas this sounds easy, you have to pull extremely onerous on the tabs to get it over the buttons. At instances, I used to be frightened doing this could injury the precise handheld, however as soon as I received over that psychological hurdle, the Killswitch snapped into place completely and all the things was positive.

Here is the place I bumped into my first utility situation. The highest of the Killswitch pushed down the stick-on pores and skin, regardless of me following the directions and operating a cleansing fabric over it a number of instances. I had this occur with the Ally X Killswitch case I’ve, too, so I considerably anticipated it. To resolve this situation, you’ll be able to take away the pores and skin, warmth it up, after which reapply. What I wanted to do is wait a bit longer for the pores and skin to stick to the Xbox Ally X earlier than placing it within the case. Fortunately, dbrand despatched me a further pores and skin, so I utilized it to the hand-held, waited barely longer, after which was extra cautious when placing on the case enclosure.

Fortunately, the case feels nice

Like different Killswitch circumstances, the ROG Xbox Ally X iteration feels extraordinarily stable. Its rubber is grippy and high-quality, however not overly abrasive (an early model I examined felt a bit an excessive amount of like sandpaper). The case additionally matches comfortable on the hand-held and would not flex in odd areas. If you happen to go for the Journey or Extremely choice, you get the Journey Cowl that snaps into place and means that you can confidently simply toss the Xbox Ally X in a bag with out worrying about it getting broken. Like with the ROG Ally X, snapping it into place takes a little bit of drive, although.

I might have preffered dbrand used the identical elastic band-like clasp mechanism it makes use of for the Swap 2’s Killswitch case, because it would not take as a lot drive. This time round, I made a decision to make use of the stick grips, however they don’t seem to be essential. They very simply connect to every joystick and add a little bit of further grip to the hand-held.

If you happen to’re searching for a high-quality approach to shield your ROG Xbox Ally X once you’re on the go, dbrand’s Killswitch has as soon as once more confirmed to be the most effective on the market, so long as you are prepared to shell out the money for it.